pump#
A pump from one module to another.
Input connections |
|
Output connections |
|
License |
PRODRISK_OPEN |
Release version |
9.6.1 |
Attributes#
| Object type | Attribute name | Python data type | Core data type | Time series completion | unit | Default value | I/O | License | Version added | Description |
|---|
| Loading ITables v2.3.0 from the internet... (need help?) |
max_reserve_down_cost#
Violations of maximum reserve down allocation. (unit: MW, time series completion: step curve)
maintenance#
Capacity unavailable due to pump maintenance. This attribute is not required input and may be left out if no maintenance is scheduled (unit: MW, time series completion: step curve)
max_reserve_up#
Maximum reserve up allocation. (unit: MW, time series completion: step curve)
usage_cost_type#
Usage cost type (1-3) 1: fixed EUR/MW, 2: percent of spot, 3: delta to spot in EUR/MW (unit: none)
intakeRsvCurve#
Do not pump if downstream reservoir volume is below this limit. Used in strategy and simulation. (unit: Mm3, time series completion: interpolation)
name#
Pump name, written to internal file model.h5. Not used for anything else. (unit: none)
topology#
Toplogy description for pumps (external module numbers for): [module containing the pump, module where water is pumped to, module where water is pumped from]. If this is a genuine pump (not pumped-storage power plant), then the module containing the pump should be the module where the water is pumped from. If this is a pumped-storage power plant, then the module containing the pump should be the module where the water is pumped to. (unit: none)
max_reserve_up_cost#
Violations of maximum reserve up allocation. (unit: MW, time series completion: step curve)
height_relative_upflow#
Pump flow curve as a function of pump height where x is pump height (abs) and y is the flow rate. (unit: m3/s)
usage_cost#
Usage cost step series (unit determined by usage_cost_type) (unit: none, default: 1e-4, time series completion: interpolation)
maxPumpHeight#
Largest pumping height (unit: m)
averagePower#
Average consumption when pump is used (unit: MW)
maxHeightUpflow#
Pump upflow at largest pumping height (unit: m3/s)
height_relative_power#
Pump power consumption curve as a function of pump height where x is pump height (abs) and y is the power consumption. (unit: MW)
max_reserve_down#
Maximum reserve down allocation. (unit: MW, time series completion: step curve)
minPumpHeight#
Smallest pumping height (unit: m)
outletRsvCurve#
Do not pump if upstream reservoir volume is above this limit. Used in strategy and simulation. (unit: Mm3, time series completion: interpolation)
minHeightUpflow#
Pump upflow at smallest pumping height (unit: m3/s)